Axetris MFCs offer best-in-class accuracy for your application
Leister Corporate, Axetris, Mass Flow Devices
An accuracy benchmarking of popular thermal mass flow controller products proves again that Axetris mass flow controllers provide best-in-class accuracy for your application.
Accuracy – usually specified for a thermal mass flow controller in percent of full scale flow (FS) or percent of reading (RD) ― is defined as the difference between the actual flow and that of a primary standard.
A comparison of published accuracy values – in % FS – shows that Axetris MFCs lead the pack when it comes to absolute accuracy. For the comparison, a number of high-performance thermal mass flow meters and controllers were compared. Also, accuracy values in the 0-10% FS range were compared for these MFCs – since high accuracy in the lower flow range is critical to many applications. Axetris mass flow controllers are typically specified at 0.2% FS in this flow range.
Axetris mass flow solutions build on our proprietary MEMS-based technology, where the temperature difference over the surface of a MEMS chip is measured, and used as the flow control variable.
Read more about our mass flow products.